GM Ladder Racks
Choose the loading method and rack configuration for your vehicle and ladders. Review the listed rack models, mounting kits, capacities and application exclusions before selecting a system.
Compare the available configurations.
Drop-down ladder racks
GM drop-down models
| Model printed | Description printed |
|---|---|
| DDLR61GM2 | Passenger-side drop-down ladder rack |
| DDLR63GM2 | Dual-sided drop-down ladder rack |
| DDLR61GM2 | Drop-down and Grip-Lock combination; duplicate model listing requires confirmation |
| DDLRSLK2 | Adjustable step-ladder kit |
| 80-1LR | 10 ft 6 in aluminum conduit kit |
| 80-2LR | 12 ft 6 in aluminum conduit kit |
Source discrepancy: DDLR61GM2 is printed for both the passenger-side rack and the combination rack. Confirm the combination model before ordering; no replacement number has been assumed.
Aluminum rack with knob adjustment. The source describes operation by technicians 5 ft 5 in or taller; check actual reach with the selected vehicle and ladder.
The brochure describes a standard rack carrying a 28-foot extension ladder or 10-foot step ladder. Short step ladders require the optional step-ladder kit; a 32-foot extension ladder requires the extension kit. Check ladder size, operator reach, mounting application and vehicle roof limits.
Grip-Lock ladder racks
Grip-Lock · Express/Savana
| Model | Description |
|---|---|
| 61-GLGM2 | Passenger-side Grip-Lock |
| 63-GLGM2 | Dual-side Grip-Lock |
| GLSLKFSV | Step-ladder kit |
Tilt-angle rack with an inner rail and adjustable handle/latch position for step-ladder configurations. The source describes operator reach for technicians 5 ft 7 in or taller; check actual reach.
The brochure describes a standard rack carrying a 28-foot extension ladder or 10-foot step ladder. Short step ladders require the optional step-ladder kit; a 32-foot extension ladder requires the extension kit. Check ladder size, operator reach, mounting application and vehicle roof limits.
City Express
63-NV2 is the illustrated double Grip-Lock rack. The aluminum rack mounts to existing City Express roof points without drilling. The catalog also describes a single configuration but does not give its number on this page.
Adjust clamp brackets to the ladder for secure retention.
PROFILE utility rack system
PROFILE utility rack
- Aluminum and galvannealed-steel components with stainless-steel hardware.
- Powder-coated finish and standard wear strips for equipment and T-slot crossbars.
- Integrated tie-down points and accessory channels for ladder stops, rollers, ratchets and conduit kits.
- Crossbars are 3 × 1.5 inches, reinforced extruded aluminum.
- Catalog crossbar rating: up to 250 lb per crossbar. Always comply with the vehicle roof rating.
Utility rack technical details
Capacity and installation
The catalog lists 500 lb with two crossbars or 750 lb with three crossbars. The vehicle manufacturer’s roof rating remains the governing limit. No-drill installation uses the listed factory mounting points or drip rails. Installation time is stated as approximately 30 minutes, varying by configuration.
| Component | Catalog listing |
|---|---|
| Crossbars, full-size vans | 68 in |
| Crossbars, compact vans | 58 in |
| Uprights | 4 in, 6 in, 9 in and 9-inch ratchet |
| Rear Roller Assist | Full-size vans only |
| Finish | DURA powder coat, TRU white |
Conduit accessories
| Part | Description |
|---|---|
| 70-1NGLR | 4-inch end caps for PVC conduit kit |
| 70-2NGLR | 6-inch end caps for PVC conduit kit |
| 80-1NGLR | 10 ft 6 in aluminum conduit kit |
| 80-2NGLR | 12 ft 6 in aluminum conduit kit |
Utility rack models and mounting combinations
Two-bar configurations
| Uprights | Full-size van rack | Compact van rack |
|---|---|---|
| 4 in | 2B4W | 2B4CW |
| 6 in | 2B6W | 2B6CW |
| 9-inch ratchet | 2B9RW | 2B9RCW |
Order the two-bar rack plus a matching 4-pack mounting kit.
Three-bar configurations
| Uprights | Full-size van rack | Compact van listing |
|---|---|---|
| 4 in | 3B4W | Not available in this chart |
| 6 in | 3B6W | Not available in this chart |
| Two 9-inch and four 9-inch ratchet | 3B9RW | Not available in this chart |
Order the three-bar rack plus a matching 4-pack and 2-pack mounting kit.
Mounting kits
| 4-pack | 2-pack | Vehicle application |
|---|---|---|
| GMMBK4W | GMMBK2W | Express/Savana |
Three-bar rack with 6-inch uprights and rear roller
| Model | Application |
|---|---|
| 3B6RRGMW | Express/Savana |
The source excludes Transit High Roof 148-inch Extended and Sprinter High Roof 170-inch Extended from the rear-roller configuration.
Interior Ladder Keeper
Ladder Keeper
Ceiling- or wall-mounted track with a spring-loaded front clamp. Load from outside by placing the top rung in the front clamp and pushing forward until the lower rung rests in the rear bracket.
| Model | Description |
|---|---|
| LK8 | Ceiling ladder holder; up to 6-foot ladder in regular-wheelbase van, up to 8-foot ladder in long-wheelbase van |
| LKX | Ladder-holder extension; adds 4 feet of track |
Unloading
- Press inward to release the rear rung from its bracket.
- Walk the ladder back while the front bracket slides along the track.
- Remove the front rung from the front bracket.
General-service package components are listed on the GM trade-packages page.
Plan around your vehicle.
Have the make, model, model year, wheelbase and roof height ready when discussing equipment.