Skip to content
VanFitters · Test & development site

VanFitters · Cargo Trailer Equipment

Cargo Trailer Ladder Racks

Choose the loading method and rack configuration for your vehicle and ladders. Review the listed rack models, mounting kits, capacities and application exclusions before selecting a system.

Explore models & options

Cargo Trailer Ladder Racks
Models · Features · Fitment

Compare the available configurations.

Application reference: Cargo Trailer Equipment information is based on the supplied July 2020 catalog. Match the model year, wheelbase, roof height, trim and existing equipment before ordering. Vehicle and mounting limits still apply. Dimensions and quantities below retain the catalog conventions.
Interior and exterior ladder storage
Interior and exterior ladder storage

SDL2T side-mounted ladder rack

  • Carries two ladders on the side of the cargo trailer.
  • Powder-coated steel vertical bows; adjustable plastisol ladder clamps and nylon containment straps.
  • U-bolts provide an attachment point for a security cable.
  • Maximum ladder length depends on trailer length.

Utility racks

  • Designed for trailers 6 to 8 feet wide.
  • Welded tie hooks and upright caps.
  • Black or white powder-coated finish; one- and two-bar sets.
  • 2BRST racks with drip rails 1/2 inch wide or wider require the TRDK drip-rail kit.
Model Description
1BRST-W One-bar steel center cross-bow kit, white
1BRST-B One-bar steel center cross-bow kit, black
2BRST-W Two-bar steel utility rack, white
2BRST-B Two-bar steel utility rack, black
TRDK-W Drip-rail mounting kit, white
TRDK-B Drip-rail mounting kit, black

Ladder Keeper

LK8 stores ladders inside the trailer and off the floor. Plastic-coated clamps protect the rungs, a gas spring compresses the rungs during transport, and an extruded track guides loading and unloading. LK8 accommodates a ladder up to 8 feet long. The LKX extension adds 4 feet of track for longer trailers and ladders. Trailer roof bows are required for installation.

Unloading sequence

  • Press the ladder inward to release the rear rung from the rear clamp bracket.
  • Walk the ladder back as the front clamp bracket moves along the track.
  • Remove the front rung from the front clamp bracket.

Plan around your vehicle.

Have the make, model, model year, wheelbase and roof height ready when discussing equipment.

Call VanFitters · 905-474-2222Back to Cargo Trailer equipment