Mercedes Partitions
Separate the cab from tools and cargo. Compare the listed steel, wire, composite and sliding-door options, then match the panel and mounting kits to the exact van configuration.
Compare the available configurations.
Sprinter and Metris partitions
16-gauge steel partitions have formed reinforcing channels and lower wiring-access holes. Assembly and installation fasteners are included for base van trim; higher trim levels may require trim or partition modifications.
2007-and-newer Sprinter selection chart
State the Sprinter model, year and wheelbase when ordering. The source requires OEM option D62, pre-installation for bulkhead. Marks below reproduce the printed chart; a dash is an unmarked source cell.
| Model | Roof | Street-side solid | Center solid fixed | Center solid hinged | Center perforated fixed | Center perforated hinged | Curb-side solid |
|---|---|---|---|---|---|---|---|
| S1M1C1SPS | Standard | ✓ | ✓ | — | — | — | ✓ |
| S1M2C2SPS | Standard | ✓ | — | — | ✓ | — | — |
| S1M2HC2SPS | Standard | ✓ | — | — | — | ✓ | — |
| S1M1C1SPH | High | ✓ | ✓ | — | — | — | ✓ |
| S1M2C2SPH | High | ✓ | — | — | ✓ | — | — |
| S1M2HC2SPH | High | ✓ | — | — | — | ✓ | — |
| PA5-2SPR | Plexiglas cover panel | — | — | — | ✓ | ✓ | — |
| P2MMS | Metris | ✓ | — | — | ✓ | — | ✓ |
The source does not list 2006-and-older Sprinter part numbers. A 170-inch interior installed in a Mega High Roof Sprinter requires an OEM partition.
Metris steel partition
P2MMS: 63 W × 13 D × 53 H inches. Installs to factory attachments without drilling or setting plusnuts.
Partition door kit
PDK2 converts a fixed-center panel partition into a hinged door with a keyed handle.
Partition accessories
| Model | Description and technical information |
|---|---|
| PA7 | Reflector kit with bracket |
| PA8 | Fire extinguisher, source rating 1-A:10-BC |
| PA9 | First-aid tray for partition or vertical-surface mounting; 11 W × 4.5 H × 3-1/8 D inches |
| TH30 | 30 lb tank holder |
| TH50 | 50 lb tank holder |
| TA1 | 4-hook bar, 2 × 12 inches, with 2-inch hanger openings; vertical-surface mounting |
| PA10 | Partition-mounted file holder; 12 W × 7 H × 5 D inches |
| BH4 | 4-slot literature rack for partition or vertical-surface mounting; 2-1/2-inch-deep pockets; 12-3/4 W × 19-1/2 H × 2-1/2 D inches |
Plan around your vehicle.
Have the make, model, model year, wheelbase and roof height ready when discussing equipment.