RAM Shelving and Storage

HAD hybrid shelving

Two center ADseries shelves have 2-inch lips and adjust in one-inch increments using a screwdriver.

HD shelving

HD-28NV2 has 2-inch lips on the top/bottom shelves and a 4-inch center lip. HD32TC has 1-inch shelf lips. HD4459 has 2-inch top/bottom lips and two center shelves with 4-inch lips. These shelves adjust in one-inch increments. DV12 dividers are listed for the City units.

JD Jumbo Deep shelving

18-inch units have one 14-inch and two 18-inch shelves. 24-inch units have square end panels and two shelves. Gussets and floor rail reinforce the unit; shelf lips are 4 inches high.

Shelf units and mounting rails

Rail kits must be ordered separately. Shelves adjust in one-inch increments using the front bolts and rear shelf studs. Load ratings are 100 lb per shelf with lips facing up or 200 lb per shelf with lips facing down, evenly distributed.

Accessories

Tank cabinets

• Vented storage for propane, MAPP gas or CO2 tanks.
• Full door gasket, two snap latches, internal cradle and retaining straps; TA19 uses foam yokes.
• Floor vent and tubing are included for exhausting fumes.
• The cabinet overview lists propane tanks of 20, 30 or 40 lb, MAPP gas tanks of 6-1/2-inch diameter, and 20 lb CO2 cylinders. Confirm the appropriate cabinet for the cylinder being carried.

Shelf cabinets

• Available in 12- and 18-inch front-to-rear lengths.
• Can stand alone or stack with lockable drawer units; locking recessed T-handles stay out of the aisle.
• Open sides allow side-by-side combinations for items up to 35 inches long. An optional end panel closes the side.
• Removable adjustable shelf; top provides a surface for modular drawers, cabinets and bins.
• Gray powder-coated finish.

Cabinet lockers

Full-door lockers have a 46-inch-high storage space and three removable shelves. The overview also describes short-door lockers with a 33-inch-high space and two shelves. Reversible doors have locking recessed T-handles. The profile tapers from 14 to 12 inches front-to-back at the top and bottom.

Lock ’n Latch drawer modules

• Choose drawers open, retained or locked.
• Composite drawers with heavy-duty glides; drawers and glides can be repositioned within the cabinet.
• 2.5-inch-deep drawers include divided, removable ABS trays. Optional metal egg-crate dividers fit 5-inch-deep drawers.
• Steel outer cabinet measures 18 W × 12 H × 12 L inches.

Drawer components

High-impact polymer construction, drawer-retention stops, two dividers and seven divider slots per drawer. Interlocking units can stack up to two high or combine horizontally. Capacity: 5 lb per drawer.

Locking hinge-and-hasp drawer units

Welded drawers with reinforced slides. Accept a padlock, not included, and optional metal egg-crate dividers. Model 2 cabinet: 18 W × 24 H × 18 L inches. Model 8 cabinet: 18 W × 18 H × 12 L inches.

Snap-in bins

Bins fit ADseries shelving, nest for transport to the work site and accept a front label. Each bin accepts one optional divider.

Literature files

Slot racks mount on a partition or other vertical surface.

Cargo accessories

WRH5 5-bar spool holder

Five removable bars hold wire spools up to 6 inches in diameter. Mounts to shelf ends or another vertical surface. Overall size: 12 W × 25 H × 4 D inches.

Flooring

Workmat kits have an aluminum threshold for the side and rear doors. Composite flooring provides a solid cargo-floor surface.

Window security screens

Impact-resistant portable parts cases have adjustable dividers, see-through lids and snap latches.

First-aid kit is not included. Dimensions follow the order printed in the catalog.