Ford Ladder Racks
Choose the loading method and rack configuration for your vehicle and ladders. Review the listed rack models, mounting kits, capacities and application exclusions before selecting a system.
Compare the available configurations.
ProLift standard-drop and max-drop models
Standard-Drop ProLift · Transit low roof
Standard-Drop lowers the ladder to one set height and uses hook brackets to retain it. The source limits this configuration to full-size low-roof vans.
| Part number | Rack or component | Description |
|---|---|---|
| PLS61TL | Full rack | Passenger-side Standard-Drop |
| PLS63TL | Full rack | Dual-side Standard-Drop |
| PLS64TL | Full rack | Passenger-side Standard-Drop with driver-side Grip-Lock |
| SDPLDS | Component | Driver-side Standard-Drop kit |
| SDPLPS | Component | Passenger-side Standard-Drop kit |
Max-Drop ProLift
Max-Drop has a first lowering position and a secondary slide that lowers the rear of the ladder farther.
| Part number | Roof application | Description |
|---|---|---|
| PLM61TL | Transit low | Passenger-side Max-Drop |
| PLM63TL | Transit low | Dual-side Max-Drop |
| PLM64TL | Transit low | Max-Drop and Grip-Lock combination |
| DDPLDS | Transit low | Driver-side Max-Drop component kit |
| DDPLPS | Transit low | Passenger-side Max-Drop component kit |
| PLM61TMH | Transit medium/high | Passenger-side Max-Drop |
| PLM63TMH | Transit medium/high | Dual-side Max-Drop |
| DDPLDSMH | Transit medium/high | Driver-side Max-Drop component kit |
| DDPLPSMH | Transit medium/high | Passenger-side Max-Drop component kit |
Conduit kits listed for Transit low roof
| Part number | Description |
|---|---|
| 70-1NGLR | 4-inch end caps for PVC conduit kit |
| 70-2NGLR | 6-inch end caps for PVC conduit kit |
| 80-1NGLR | 10 ft 6 in aluminum conduit kit |
| 80-2NGLR | 12 ft 6 in aluminum conduit kit |
ProLift operating features
- Attached handle can accept a padlock.
- Pull-assist gas springs damp the load during operation.
- Wear strips protect ladder contact surfaces.
- Clamp pads adjust using a 1/2-inch wrench or ratchet/socket.
- Ladder guide/van guard guides the ladder into the front bracket.
- Max-Drop adds a secondary slide and thumb-operated release T-handle.
PROFILE Grip-Lock features
Aluminum Grip-Lock rack with single-handle operation, adjustable clamp pads, wear strips, load-assist bracket and ladder guide/van guard.
The load-assist bracket provides a resting and rotation point. Clamp pads adjust using a 1/2-inch wrench or socket. The attached, padlock-capable handle is listed for low-roof vehicles.
Grip-Lock models and interior ladder storage
Grip-Lock models
| Model | Catalog application | Description |
|---|---|---|
| GL61TL | Transit low roof | Passenger-side Grip-Lock |
| GL63TL | Transit low roof | Dual-side Grip-Lock |
| GL61TC | Transit Connect | Passenger-side Grip-Lock |
| GL63TLC | Transit Connect, as listed | Dual-side Grip-Lock |
| RRKFT | Component | Mounting roof-rail kit |
| GL-FSVDS | Component | Driver-side Grip-Lock kit |
| GL-FSVPS | Component | Passenger-side Grip-Lock kit |
Conduit kits
| Model | Description |
|---|---|
| 70-1NGLR | 4-inch end caps for PVC conduit kit |
| 70-2NGLR | 6-inch end caps for PVC conduit kit |
| 80-1NGLR | 10 ft 6 in aluminum conduit kit |
| 80-2NGLR | 12 ft 6 in aluminum conduit kit |
Interior ladder storage
| Model | Transit application | Ladder length listed |
|---|---|---|
| LK8FT | 130-inch wheelbase; low/medium roof | Up to 6 ft |
| LK8FT148 | 148-inch wheelbase; low/medium/high roof; does not fit 148 EXT | Up to 8 ft |
Ladder Keeper is loaded from outside using a spring-loaded clamp. ILR is also illustrated as an interior ladder-storage option; check the vehicle and ladder application before selection.
PROFILE utility rack system
PROFILE utility rack
- Aluminum and galvannealed-steel components with stainless-steel hardware.
- Powder-coated finish and standard wear strips for equipment and T-slot crossbars.
- Integrated tie-down points and accessory channels for ladder stops, rollers, ratchets and conduit kits.
- Crossbars are 3 × 1.5 inches, reinforced extruded aluminum.
- Catalog crossbar rating: up to 250 lb per crossbar. Always comply with the vehicle roof rating.
Utility rack features and capacities
Capacity and installation
The catalog lists 500 lb with two crossbars or 750 lb with three crossbars. The vehicle manufacturer’s roof rating remains the governing limit. No-drill installation uses the listed factory mounting points or drip rails. Installation time is stated as approximately 30 minutes, varying by configuration.
| Component | Catalog listing |
|---|---|
| Crossbars, full-size vans | 68 in |
| Crossbars, compact vans | 58 in |
| Uprights | 4 in, 6 in, 9 in and 9-inch ratchet |
| Rear Roller Assist | Full-size vans only |
| Finish | DURA powder coat, TRU white |
Conduit accessories
| Part | Description |
|---|---|
| 70-1NGLR | 4-inch end caps for PVC conduit kit |
| 70-2NGLR | 6-inch end caps for PVC conduit kit |
| 80-1NGLR | 10 ft 6 in aluminum conduit kit |
| 80-2NGLR | 12 ft 6 in aluminum conduit kit |
Utility rack configurations and Ford mounting kits
Two-bar configurations
| Uprights | Full-size van rack | Compact van rack |
|---|---|---|
| 4 in | 2B4W | 2B4CW |
| 6 in | 2B6W | 2B6CW |
| 9-inch ratchet | 2B9RW | 2B9RCW |
Order the two-bar rack plus a matching 4-pack mounting kit.
Three-bar configurations
| Uprights | Full-size van rack | Compact van listing |
|---|---|---|
| 4 in | 3B4W | Not available in this chart |
| 6 in | 3B6W | Not available in this chart |
| Two 9-inch and four 9-inch ratchet | 3B9RW | Not available in this chart |
Order the three-bar rack plus a matching 4-pack and 2-pack mounting kit.
Mounting kits
| 4-pack | 2-pack | Vehicle application |
|---|---|---|
| FTMBK4W | FTMBK2W | Transit low roof |
| FTMBK4W | FTMBK2W | Transit medium/high roof |
| TCMBK4W | TCMBK2W | Transit Connect |
Three-bar rack with 6-inch uprights and rear roller
| Model | Application |
|---|---|
| 3B6RRFTW | Transit |
The source excludes Transit High Roof 148-inch Extended and Sprinter High Roof 170-inch Extended from the rear-roller configuration.
Plan around your vehicle.
Have the make, model, model year, wheelbase and roof height ready when discussing equipment.