VanFitters · Test & development site
VanFitters · Chevrolet Express and GMC Savana
GM Partitions
Separate the cab from tools and cargo. Compare the listed steel, wire, composite and sliding-door options, then match the panel and mounting kits to the exact van configuration.
Models · Features · Fitment
Compare the available configurations.
Application reference: Chevrolet Express and GMC Savana information is based on the supplied December 2021 catalog. Match the model year, wheelbase, roof height, trim and existing equipment before ordering. Vehicle and mounting limits still apply. Dimensions and quantities below retain the catalog conventions.
Steel S-M-C partitions and wing kits
Select the panel kit and the vehicle-specific wing kit separately. Panel and wing kits include assembly and installation fasteners for base van trim. Higher trim levels may require trim or partition modifications.
Express/Savana steel panel kits
| Panel kit | Panel configuration | Center panel | Compatible wing-kit choices |
|---|---|---|---|
| S1M1C1FSV | Solid panels | Fixed | WKC1FSVGM or WKC1FSVGM3 |
| S1M2C2FSV | Perforated center and curb panels | Fixed | WKC1FSVGM or WKC1FSVGM3 |
| S1M2HC2FSV | Perforated center and curb panels | Hinged, key-locking door | WKC1FSVGM or WKC1FSVGM3 |
- S panels mount behind the driver seat; C panels mount behind the passenger seat.
- The partition mounts behind the B-pillar.
- Hinged-center partitions include two 6-inch hinges, a bulb seal and a slam latch.
- Pre-drilled accessory holes and larger wiring pass-through holes are provided.
- Wing kits are offered at standard setback or with an extra 3 inches of setback.
- Extended wing kits reduce cargo space. Check clearance against the equipment layout.
- 3-inch extended wings are not compatible with GM Pro/Access vans.
Composite partitions
Composite partitions use an integrated steel frame and are available with or without a clear poly rear-view window.
| Model | Description |
|---|---|
| PARGM | Composite partition with visibility window |
| PARGM-NW | Composite partition without window |
- Hooks can be added along the integrated AD rail.
- Mounting location near the door accepts a fire extinguisher; extinguisher is not included.
Partition accessories
| Model | Description and technical information |
|---|---|
| TA1 | 4-hook bar, 2 × 12 inches. Mounts to partition or shelving; four welded hooks with 2-inch hanger openings. |
| PDK1 | Steel partition door kit converts an M-Series fixed center into a hinged door with keyed slam latch. Includes two 6-inch hinges, bulb seal and slam latch. |
| PA7 | Reflector kit with metal pocket holder and bracket; the source describes it as I.C.C. approved. |
| PA9 | First-aid tray for partition or vertical-surface mounting. 11 W × 4-1/2 H × 3-1/8 D inches. |
| PA8 | Rechargeable 2-1/2 lb dry-chemical extinguisher for Class A, B and C fires; includes charge gauge and mounting bracket. |
| PA10 | File holder, 12 W × 7 H × 5 D inches. |
| TH30 / TH50 | Tank holders for 30 lb or 50 lb tanks; attach to partition or another vertical surface. |
Plan around your vehicle.
Have the make, model, model year, wheelbase and roof height ready when discussing equipment.