Nissan Partitions
Separate the cab from tools and cargo. Compare the listed steel, wire, composite and sliding-door options, then match the panel and mounting kits to the exact van configuration.
Compare the available configurations.
NV Cargo composite partitions
Composite construction includes an integrated steel frame and is available with or without a clear poly rear-view window. The formed contour separates the cab and cargo areas. Hooks can be added along the integrated AD rail; a mounting location near the door accepts a fire extinguisher, which is not included.
| Roof | Model | Description as listed |
|---|---|---|
| Low | PARNL | Composite partition with visibility |
| Low | PARNL-NW | Composite partition without window |
| High | PARNH | Composite partition with visibility |
| High | PARNL-NW | No-window model printed in the high-roof list; requires confirmation |
Source discrepancy: the high-roof no-window listing repeats PARNL-NW from the low-roof list. A high-roof replacement part number has not been invented. Confirm the model before ordering.
NV200 composite partitions
Composite construction includes an integrated steel frame and is available with or without a clear poly rear-view window. The formed contour separates the cab and cargo areas. Hooks can be added along the integrated AD rail; a mounting location near the door accepts a fire extinguisher, which is not included.
| Model | NV200 description |
|---|---|
| PARNV2 | Composite partition with visibility window |
| PARNV2-NW | Composite partition without window |
NV Cargo steel partitions
Stamped-steel S-M-C partitions are listed for standard- and high-roof NV Cargo. S panels mount behind the driver seat, M is the center panel, and C panels mount behind the passenger seat. Mounts behind the B-pillar.
| Panel kit | Panel description | Center |
|---|---|---|
| S1M1C1FSV | Solid panels | Fixed |
| S1M2C2FSV | Perforated center and curb panels | Fixed |
| S1M1HC1FSV | Solid panels | Hinged door |
| S1M2HC2FSV | Perforated center and curb panels | Hinged door |
Mounting/wing kits
| Model | NV Cargo roof | Position |
|---|---|---|
| WKC1LCVS | Standard | Max Cargo |
| WKC1LCVS3 | Standard | Max Comfort, extra 3-inch setback |
| WKC1LCVH | High | Max Cargo |
| WKC1LCVH3 | High | Max Comfort, extra 3-inch setback |
- Hinged center doors include two 6-inch hinges, bulb seal and slam latch.
- Pre-drilled accessory holes and wiring pass-through holes are provided.
- Extra setback adds cab/seat-adjustment room and reduces cargo space by 3 inches. Check equipment clearance before installation.
NV200 steel and wire partitions
| Model | NV200 description |
|---|---|
| P2NV2S | Steel partition with visibility; perforated window, steel header and full-perimeter wings |
| P2NV2FW | Wire partition |
Both designs separate cab and cargo areas and are recessed for front-seat adjustment. P2NV2S has a recessed lower panel providing space for a 6-foot step ladder or other accessories. Wing kits are not needed.
Plan around your vehicle.
Have the make, model, model year, wheelbase and roof height ready when discussing equipment.